Product Description
– 4 channel amplifier
– 2800 W per channel at 4 ohms
– Versatile, compact and highly energy-efficient
– Dante networked audio
The DX-100I are DSP processing amplifiers that offer the same power outputs as the DX-100. The DX-100I accepts analog, AES3 digital and optional Dante networked audio. The DX-100I can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP DX Series amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DX amplifiers that have Dante cards fitted, or by any other Dante enabled device. Connectivity for remote control is covered by USB, Ethernet and RS485, with a relay of either USB or Ethernet control via RS485 to work with legacy products.
Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD |
4 x 1400 W |
4 ohms EIA 1 kHz 1% THD | 4 x 2800 W |
2 ohms EIA 1 kHz 1% THD | 4 x 3500 W |
Bridge Mono Mode 8 ohms EIA 1 kHz 1% THD |
2 x 5600 W |
4 ohms EIA 1 kHz 1% THD | 2 x 7000 W |
Frequency Response | 0.5 dB (20 Hz – 20 kHz) |
Total Harmonic Distortion (20 Hz-20 kHz) | < 0,1 % |
Damping Factor @ 8 ohms | > 500 |
Voltage Gain | 32 dB |
Output Circuitry | Class D |
AC Requirements | 7.5 A, 240 VAC (4 ohms) 15. A, 120 VAC (4 ohms) |
Dimensions (H x W x D) | 8.8 x 48.2 x 42.8 cm 3.5 x 19 x 16.9 in |
Weight | 10.9 kg (24) lb |